|
The minimum diameter of the drill, mm |
90 |
|
The maximum diameter of the drill,mm |
165 |
|
Maximum drilling depth,m |
30 |
|
Swivel |
With integrated air supply unit 1500 Nm |
|
Drilling base |
Drilling mast carriage with chain drive (force on the slaughter / lift: 2.5 m / 2.5 m) |
|
The maximum speed turn the spinner: |
|
|
- drilling at (m / sec) |
0,7 |
|
- lifting (m / s) |
1,1 |
|
Maximum rotator travel, mm |
till 3200 |
|
The possibility of fine adjustment of effort to pulling down force |
Include |
|
The possibility of smooth adjustment of turns |
Include |
|
Lighting of the console and work area |
Include |
|
Ability drilling angle |
tilt adjustment is performed in one plane |
|
Drilling rig moving speed (km / h) |
till 5 |
|
Weight of drilling rig,t |
till 3 |
|
Type of crawler base |
Rabber crawlers |
|
Rods feeding system |
No |
|
Rig base |
D245 Diesel power plant with a group of hydraulic pumps |
|
Controller |
Remote Operator Located on the installation. distributors controlled by |
|
Cabin |
Heating, lighting, gratings |
|
Outriggers hydraulic |
4 pcs (optional) |
|
Design capacity VIII Cat |
60-80m / shift (8h) |
Drilling rigs
Horizontal Drilling Rigs
Drilling tools
NULL