Installation mini - ZEVS 6000

Description
Specifications
Tool

Description

The compact unit ZEVS 6000 is a powerful and productive mini HDD unit of excavated type. Depending on the soil, the ZEVS 6000, with a pulling force of 6 tons, makes it possible to lay boreholes at a distance of up to 50 m with an expansion diameter of up to 300 mm. The small dimensions of the unit make it possible to work in conditions of dense urban development and limited spaces. The use of drilling fluid makes it possible to consider ZEVS 6000 as a complete HDD unit. ZEVS 6000 provides for the use of a location system, and also, to increase the level of security, the installation has a built-in warning system for a possible electric shock and a grounding pin. ZEVS 6000 is supplied complete with a drilling mud mixing station and a hydraulic power station. When working with the unit, a hydraulic system with suitable characteristics can also be used.

Specifications

Parameter	Value
Maximum drilling length	100 m
Maximum extension	300 mm
Maximum pipe diameter	300 mm
Dimensions (LWH)	16006001115 mm
Weight	280 kg
Maximum pulling force	6t
Maximum pushing force	6t
Max Torque	1600 N/m
Working length of the rod	1000 mm
Drill rod diameter	50 mm
Carriage travel	1100 mm
Rated pressure of the hydraulic system	160 bar
Engine power	60 HP (44 kW)
rack and pinion

Tool

Pipe clamps Pipe clamps are used to fix HDPE pipes when pulling into the well. Made of solid metal, the grips securely fasten the pipe, by means of four fixing fingers
Drilling rod Rod L=694 mm (including threaded connection), working length l 650, steel 30HGSA, thread hardened 3-38 GOST R 50864-96. For ease of use on the drill rod there are 3 "ski", instead of the standard two
Back-reamers of different diameter A new model of back-reamers developed by the designers of our company. Now dilators have become easier, as well as reduced the compaction angle Now it is 30 degrees, instead of 70, which greatly facilitates the work in soils 1-3 categories. The model range of back-reamers is represented by a variety of diameters from minimum 90 mm to maximum 400 mm (for a some types of rigs)
Pipe bursting of cast-iron pipes Shown in the photo the model is designed for the bursting of the only cast-iron pipes. Our company can make a tool for the pipe bursting from any material: steel, ceramics, etc.
Drilling spear The drilling spear has a cylinder shape and is used in pilot drilling. The updated model of our drilling spear has a larger area and diameter than the diameter of the rod, which will fully protect you from the so-called "sticking rod" in the ground.
Drilling pilot In the manufacturing of drilling pilots, we choose end loading of the probe, as such loading completely eliminates the loss of the probe under the ground when working in difficult soils. On the drilling blade uses a special soldering, which provides wear resistance of the drilling pilot.We also use textolite material for better signal permeability and protection of the probe from dirt and damage.