| The minimum diameter of the drill, mm | 90 |
| The maximum diameter of the drill,mm | 165 |
| Maximum drilling depth,m | 30 |
| Swivel |
With integrated air supply unit 1500 Nm to 100 vol. / min |
| Drilling base |
Drilling mast carriage with chain drive (force on the slaughter / lift: 2.5 m / 2.5 m) for drilling pipes L = 3000 mm |
| The maximum speed turn the spinner: | |
| - drilling at (m / sec) | 0,7 |
| - lifting (m / s) | 1,1 |
| Maximum rotator travel, mm | till 3200 |
| The possibility of fine adjustment of effort to pulling down force | Include |
| The possibility of smooth adjustment of turns | Include |
| Lighting of the console and work area | Include |
| Ability drilling angle | tilt adjustment is performed in one plane |
| Drilling rig moving speed (km / h) | till 5 |
| Weight of drilling rig,t | till 9 |
| Type of crawler base | Rabber crawlers |
| Rods feeding system | 5+1 |
| Rig base | D245 Diesel power plant with a group of hydraulic pumps |
| Controller |
Remote Operator Located on the installation. distributors controlled by levers and joysticks. Panel includes: controls chassis controls chisel gun carriage, control devices and control and hydraulic power unit, lighting control, emergency stop button |
| Cabin | Heating, lighting, gratings |
| Outriggers hydraulic | 4 pcs (optional) |
| Design capacity VIII Cat | 100-120m / shift (8h) |
Drilling rigs
Horizontal Drilling Rigs
Drilling tools
NULL
Russian
Kazakh
