MBSh 303 for Tractors

Description
Specifications

Description

The rig can be equipped with a remote control (except for the economy of execution), which allows you to control drilling when the driller is in close proximity to the wellhead.
When the rig is equipped with a hydraulic rotary reducer (maximum torque 2000, 4000 N / m), equipped with a drilling fluid supply unit for washing or compressed air supply for work with purge and air hammer is not required.
In the basic configuration, the unit is equipped with a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool.
Carriage feed - on hydraulic cylinder or chain.
The rig can be equipped with a hydraulic auxiliary winch, hydraulic outriggers.
It is possible to increase the mast to work with the pipe up to 3 meters
The powder coating of the elements increases the corrosion resistance.

Specifications

Category rocks strength	up to 12
The maximum diameter of the initial bit mm	300 (optional till 800)
Drilling depth m.
With washing	up to 200
With Compresso	50
Augers (Ф 150 mm)	up to 35
Pull down force kg	3000 (optional 6000)
Lifting force, kg	5000 (optional 7000)
Lifting speed carriage m / s	Up to 1.3 (in accordance with the terms of reference of the customer)
Progress carriage rotator mm.	1670 (optional till 3100)
The frequency of rotator speed r / m	10 - 170 (optionally till 600)
Max. Torque Nm	1200 (optional 6000)
Weight kg	up to 1000 (depending on the customer's request)

MBSh 303 for Tractors