MBSH 309

Description
Specifications

Description

* The price is without the cost of the chassis.
MBSH-309 is used for drilling wells with a diameter of 800 mm in soils of I-IV categories.
The feed mechanism consists of a cable pulley and hydraulic cylinder. It provides supply and removal tool.
A special protective bell protects the wellhead from falling asleep during drilling. It is also necessary to clean the hole from the ground after the work is completed when the mast is in the transport position.
Additionally, MBSH-309 is equipped with welding equipment DSG-01.
Possibility to install crane equipment according to the customer's technical task

Specifications

Chassis	Depend on customer request
The maximum drilling depth	up to 50 m (depending on the diameter of the auger)
Drilling diameter	0.36 m, 0.5 m, 0.06 m, 0.8 m
Type of main drilling tool:	Auger
drilling method	Rotary
method of penetration	unstopoble
Maximum torque on the drilling tool	6000 N * m, 600 kg
Maximum axial load on the drilling tool
- Drilling-out	3000 Nm, 300 kgs
- Drilling-in	3000 Nm, 300 kgs
Drivetrain supply drilling tools	Hydraulic
Feeding stroke carriage rotator	3100 mm
Type of rotation the drilling tool	Hydraulic
Drilling angle	1.39 rad ... 1.66 rad (80 ° ... 95 °)
Rotational speed drilling tool	25 - 67 rev / min
Technical performance (during drilling 0.5 m) in the hollow depth nemёrzlyh soils of category III	15 m/h

MBSH 309

MBSH 309

Description

Specifications

Categories

Watching now

Crawler base Model XL

Tools for Rod Pusher

SBU -105

DCM 307

Services

Labour time

Machines

Feedback